Posts Tagged ‘Precision Brew Barista Urns’
Grindmaster PrecisionBrew Barista Series Urn
The Grindmaster PrecisionBrew Technology gives the user complete control over the brew cycle, contact time, and brew temperature. These urns are made to order; therefore, they vary in price and are not an in stock item. However, when ordered, they will be ready to ship in about 5 days.
Model PB-8113 is a 3 gallon size urn that has a dual wall, is air insulated and has an electro-polished liner that holds coffee between 180°F and 185°F. The urn uses fresh water for brewing that is heated in a coiled, nickel-plated, copper heat exchange tube inside the urn. As water passes through the heat exchanger coil it is heated to optimum brew temperature. Thus, the brew temperature varies less than 5ºF throughout spay over process. An automatic coffee agitation thoroughly mixes the brewed coffee immediately after spray over is completed. The electro-polished liners create a smooth surface on coffee liner for easy cleaning. The dual wall urn body is filled with fiberglass insulation creating an energy savings with the minimized heat loss and air-conditioning costs because of the otherwise added heat in the room.
The durable construction of the urn is made by the use of A.I.S.I. type 304, 18-8 stainless steel. The urn also has an automatic refill of water compartment and reheats as needed when the coffee is finished brewing. The fully automatic push button operation makes this pump style urn easy to operate. Simply load brew basket with coffee, align spray arm over basket lid hole and press brew start button. It is even easy to adjust the spray over rate; all it takes is a simple screwdriver adjustment. Thus, there is no awkward changing of parts. An adjustable bypass valve on spray arm enables proper coffee extraction even with variable water conditions. A dial thermometer with color-marked brew zone lets you know if you need to adjust the knob on the thermostat, which is on the front of the urn. The four marked positions on the thermostat are: brew, hold, night standby and off.
The model PB 8113E electrical requirements are 120/208 volts 38amps at 8.0 kw 1Phase. This urn is 36 inches high by 26 inches wide by 22 inches deep and weighs 90 pounds. Its shipping weight is 105 pounds.
PrecisionBrew Barista Series Urn
The PrecisionBrew Barista Series Urns are a new product from Grindmaster. Its new digital technology gives the user complete control over the brew cycle, contact time and brew temperature. All Barista Series Urns are three gallon in size, but in a single unit, a twin unit or two liner unit and a three liner unit.
The urn has a dual wall making it air insulated with electroplated liners that hold the coffee temperature between 180°F and 185°F. The smallest size is the Grindmaster PB8113E single 3 gallon. It runs at 8.KW / 120/208V / 38A / 1Phase. The size is 36”H x 26”W x 22”D and the shipping weight is 105 lbs. Note: Picture above only picture abailable at this time.