Posts Tagged ‘high volume urn’
AMW High Speed High Volume Urn 87710E
The Grindmaster AMW high speed high volume urn model 87710E has simultaneous two side brewing. Water is heated in large water compartment and is sprayed over the grounds by two independently controlled water pumps. The brew temperature varies less than 5ºF (3ºC) throughout spray over and thoroughly mixes the brewed coffee immediately after the spray over in is completed. Each water compartment will automatically refill and reheat as needed. The spray arms pistons are Teflon® coated to prevent liming and insures smooth operation positive “stops” on spray arm for operator ease. It has a low water cutoff that protects the heating elements from burn out at the start-up or in operation.
This high speed high volume urn is easy to operate and is fully automatic with push button operation. Simply load the brew basket with coffee, align the spary arm over the basket lid hole and press brew start button. The adjustment of the spray over rate is easy and a simple screwdriver adjustment. No awkward changing of parts necessary.
An adjustable bypass valve on the spray arm enables proper coffee extraction even with variable water conditions. A dial thermometer has a color-marked brew zone. The thermostat is adjustable from the front knob on the thermostat with four marked positions: Brew, Hold, Night Standby and Off.
Each liner is 10 gallons and made of durable A.I.S.I. type 304, 18-8 stainless steel. The electrical requirements for this urn are 15KW / 120/208V / 72A / 1Phase. The shipping dimensions are 41”H x 57”W x 28”D and the shipping weight is 220 pounds.