Archive for the ‘urns’ Category
Cecilware Twin 3 Gallon Automatic Urn
Coffee MakersShop.com has the Cecilware Twin 3 Gallon Automatic Stainless Steel Coffee Urn on Sale until the October 31st. A 3 gallon brews in 1 lb. of coffee batches. It uses a standard, fresh water brewing system and has an adjustable by-pass, automatic push button agitator, cycle stop switch and side mounted control panel.
Features:
• A New Modern Look and User – Friendly Operation.
• New Silicone Fittings – Prevent corrosion, pitting & leakage.
• New solid-state dual water level control.
• Relocated thermostat sensor to side box – Easy access and service.
• Seamless urn liners standard.
• Easy Changing of The Water Pump or Thermostat – No need to empty urn completely.
• Provides (2) Brew Cycle Choices – Full batch and half batch. Full Batch Standard / Half Batch
• Brews 25 gallons of coffee per hour
• Relocated Thermometer – Easier to read.
• Relocated Agitator Pump.
• Relocated Blend Hoses.
• Adjustable By-Pass and Automatic Agitators
• Thermometer indicates when water is at optimum brewing temperature (197°F- 204°F)
• Two each 3 gallon reservoirs
• Automatic refill
• Automatic agitation
• Cycle stop switch
• Overflow tube
• Uses Tomlinson long life drip-less faucets
• Movable spray arm
• Adjustable legs
Specifications:
• Plumbing: ¼” Water line required.
• Electrical: Specify voltage, comes standard in 1 phase
• Construction: Seamless stainless steel urn.
• Filters: Order #718 filters.
• Description: Adjustable By-Pass, Automatic Agitator, Solid State Timer
• Dimensions: 33.5” W x 17.5”D x 28.5 “H
• Shipping Dimensions: 37.”W x 19.5”D x 31”H
• Electrical: 120/240V, 8KW, 34A, 1P; 120/208V, 6KW, 29A, 1P
• Shipping Weight: 100 lbs
• 120/208 volt: 1 phase / 8 KW
• One Year Warranty on Parts and Labor
The Banquet Brewing Urn
The Banquet Brewing Urn is a system of urns that has one 60 gallon capacity and one 5 gallon holding tank. This system may consist of one or two high speed automatic coffee brewing urns of twin 10 gallon capacity and a holding urn with multiple dispensing faucets. As little as 200 or up to 4,000 cups of coffee may be brewed and held at one time ready for serving. It has a low water cutoff and an automatic air agitation.
This Grindmaster brewing system runs on a 120/208 V at 15.0 KW and 72 Amps single phase per urn. The overall dimensions are 52.5” high by 81” wide by 24” deep and delivered on 2 skids. This urn system has the following listings UL, CSA and NSF.
AMW Single Three gallon Midline Pump Urn
Grindmaster AMW urns are made to order. The urn shown is the basic model 7713. Most orders include specific additions that are in stock, but are added when an order is verified. It will then be ready to ship in about 5 days.The Grindmaster AMW urns make up the most complete line of coffee urns worldwide. They provide the greatest advantages for the operator in three major areas.
The pump style brewing system heats water in a large water compartment and is sprayed over the grounds by high temperature water pump. This spray arm has a Teflon coating on the spray arm piston to prevent liming and insures smooth operation. Positive “stops” on the spray arm offer operator ease. A constant brew temperature means the brew varies less than 5°F (3°C) throughout the spray over. The automatic coffee agitation thoroughly mixes brewed coffee immediately after spray over is completed.
The water compartment automatically refills and reheats as needed. A low water cutoff system protects the heating elements from burn out at the start-up of the operation or while it is in operation. This is a fully automatic push button operation. Simply load the brew basket with a paper filter and coffee, align the spray arm of the basket lid hole and press the brew start button. An adjustable bypass valve on the spray arm enables proper coffee extraction even with the variable water conditions. A dial thermometer with a color-marked brew zone on the front of the urn sets the thermostat for Brew, Hold, Night Standby and Off. The service drain is on the bottom and a control drawer with all electronic components is accessible from the side.
This Midline Pump urn brews 14 gallons per hour (450 five ounce cups) runs on 120/240 volt single phase 3-wire plus a ground wire at 29 amps. This urn is UL, CSA and NSF Sanitation listed and shipping weight is 90 pounds.
Hamilton Beach 42-Cup Coffee Urn
The Hamilton Beach 42 cup has a polished aluminum body with black plastic lid, handles and base. It brews coffee at a cup a minute. The water level indicators on the side of the urn offer six different amounts from 12 cups to 42 cups. When the coffee is through perking a ready to serve light comes on. Guests can then easily serve themselves by simply pressing the cup against the cup activated dispensing lever.
The black plastic lid is a twist to lock lid for safety while perking. The black plastic handles make it easy to move even when it is full of coffee. A removable electric cord makes for easy storage. The lid and permanent brew basket are dishwasher safe.
This coffee urn weighs six pounds and comes with a one year replacement or repair warranty. Replacement parts, if needed, are available at: www.hamiltonbeach.com.
Make a better cup of coffee in your model 40516 urn using these instructions. Pour water into urn to desired water level; run water through the permanent coffee filter basket (this will keep small particles from sifting through); make sure the stem is seated in the heating element well; add 2-1/2 cups of ground coffee for 42 cups of coffee, 2-1/4 cups for 36 cups of coffee and 1-3/4 cups of coffee for 30 cups.
I recently added this urn to my store. It is rated with a 4 star rating by 17 consumer reviews. We seldom think of the great advantages of having an urn. This shining beacon of brew is an elegant mirror-finished stainless steel coffee urn. It dispenses cup after cup of hot delicious coffee. Its sleek, sweeping contours make a dazzling presentation on your next holiday dinner side board where your guests can help themselves to a delicious hot cup of coffee time after time. Or it may be at a party or during a special sports event gathering at your home. This urn automatically switches to keep-warm temperatures and continues to pour perfect piping hot coffee from its non-drip spigot.
This urn is made of durable stainless steel construction and maintains a consistent brew speed of 1-cup per minute. This urn has a ready indicator light and an automatic keep warm mode along with a cool-touch base as well as a lid knob with elegant side handles. The non-drip spigot is a great feature that keeps your area dry. This urn pulls 1150 watts at its highest peak of performance and comes with a one year warranty. P.S. Farberware has been making percolators and urns for around 100 years.
AMW Banquet Brewing System AMW-60E
The American Metal Ware high volume coffee brewing and holding system provides advantages to the user in three functions: brewing, holding transferring/filling operation. Each brewing urn is equipped to brew both sides at one time; 20 gallons of coffee can be brewed within 15 minutes (10 gallons on each side). The basic brewing urn is of the Space Saver type urn, electric or steam heat. It requires connection to a source of 140°F potable hot water with a 3/8” NPT. Each urn uses a pump-type brewing sys tem with a separate sprayover pump and spay arm for each coffee liner. Additional equipment and options include:
- 2 All stainless steel coffee liner filter screens
- 2 Model BB810 brew baskets for use with paper filters
- Low water cutoff system to protect the urn and immersion heater
- Automatic refill of the water compartment
- Adjustable bypass on each spray arm
- Start/stop pushbutton brewing timers; one for each liner
- Automatic air agitation of the coffee, programmed to operate only when not using the transfer pump system
Two coffee transfer pumps with NSF approved stainless steel braid covered Teflon lined hoses to connect the brewing urn liners to a holding urn. The transfer pumps are mounted in stainless steel housings located on the left and right ends of the coffee brewing urn.
Easy access for service is provided from the front of the housing, which also contains the sprayover pumps.
Sanitary Teflon sealed ball valves connect the transfer system to the coffee brewing liners. When the valves are closed, the liners are isolated from the transfer system and holding urn.
Thus, the automatic coffee brewing urn may be used as a normal coffee urn and 10 gallons can be brewed as an individual batch at any time. Coffee is held at 180°F to 190°F by externally mounted electric heaters underneath the stainless steel bottom. Thermostatic control is provided and the 4 faucets all have a 10” clearance allowing for a rapid refill process because one person can control two faucets at a time.
The electrical requirement for this system is 15KW / 120/208V / 72A per urn / 1Phase. The shipping dimensions are for two skids: skid 1: 42”H x 27”W x 41”D; skid 2: 43”H x 27”W x 54”D. Total shipping weight is 460 shipped in 2 containers.
AMW High Speed High Volume Urn 87710E
The Grindmaster AMW high speed high volume urn model 87710E has simultaneous two side brewing. Water is heated in large water compartment and is sprayed over the grounds by two independently controlled water pumps. The brew temperature varies less than 5ºF (3ºC) throughout spray over and thoroughly mixes the brewed coffee immediately after the spray over in is completed. Each water compartment will automatically refill and reheat as needed. The spray arms pistons are Teflon® coated to prevent liming and insures smooth operation positive “stops” on spray arm for operator ease. It has a low water cutoff that protects the heating elements from burn out at the start-up or in operation.
This high speed high volume urn is easy to operate and is fully automatic with push button operation. Simply load the brew basket with coffee, align the spary arm over the basket lid hole and press brew start button. The adjustment of the spray over rate is easy and a simple screwdriver adjustment. No awkward changing of parts necessary.
An adjustable bypass valve on the spray arm enables proper coffee extraction even with variable water conditions. A dial thermometer has a color-marked brew zone. The thermostat is adjustable from the front knob on the thermostat with four marked positions: Brew, Hold, Night Standby and Off.
Each liner is 10 gallons and made of durable A.I.S.I. type 304, 18-8 stainless steel. The electrical requirements for this urn are 15KW / 120/208V / 72A / 1Phase. The shipping dimensions are 41”H x 57”W x 28”D and the shipping weight is 220 pounds.
Grindmaster Tamper Resistant Urn
The tamper resistant urn has no exposed fasteners. When the urn is closed all the components including all controls, timer, thermostats, and sprayover flow control are under lock and key. This model comes with two permanent filter baskets: no filter papers needed. This urn is a high speed brewing pump urn because of its two independent brew heads brew into the 10 gallon (38L) liners simultaneously or independently. Complete internal air agitation system for each liner. Indicator lights replace gauge glasses and a water hot light replaces the thermometer. To eliminate potential burn hazards, two layers of high density fiberglass insulate body. This urn has flanged feet and can be fastened to counter top to prevent tipping or movement. The Master on/off switch is behind a stainless steel, lockable panel. Control switches and pilot lights are protected behind a tamper resistant, one inch thick Lexan® cover plate. For a longer average life the internal frame is all A.I.S.I. type 304, 18-8 stainless steel. The middle faucet is for hot water.
You can specify an electric urn or steam urn by place an (E) or (S) after the model number. This Grindmaster tamper resistant model 67710(E) is an insulated two liner urn at 10 gallons each. The electrical requirements are: 15KW / 120/208V / 72A / 1Phase standard; other voltages are available. The shipping dimensions are 41”H x 42”W x 26”D and its shipping weight is 275 pounds.
Grindmaster Coffee Urn 8116
The Grindmaster AMW Space Saver 6 gallon single liner urn has a dual walled insulated body. The controls are located under the body of the coffeemaker body to save space. This is a fresh water style urn meaning that fresh water is used for each batch. This model is also available in a twin liner model. The triple liner model comes as a pump style urn.
The electrical requirement for this AMW Space Saver model 8116E urn is 11.5KW / 120/208V / 72A / 1Phase. The shipping dimensions are 42”H x 45”W x 26”D and it weighs 145 pounds. The listings for this model are: UL – CSA – NSF. An appropriate cord and plug are included with this coffee urn.
PrecisionBrew Barista Series Urn
Friday was an introduction to the PrecisionBrew Baritsta the smallest size urn. Actually, the most popular size is the largest size. The Precision Brew urn model PB8303 has the same digital technology that gives the user complete control over the brew cycle, contact time and brew temperature. There three – 3 gallon liners are a dual walled, air insulated and electropolished to hold coffee between 180°F and 185°F. The appropriate cord and plug are included with this coffeemaker.
The electrical requirements for this urn are 11.5KW/ 120/208V / 55A / 1Phase. Its shipping dimensions are 41”H x 57”W x 28”D and it weighs 195 pounds. This urn like the PB-8113E has Tomlinson no drip faucets.