Archive for the ‘shuttles’ Category
I have had a lot of people looking for commercial coffee brewers. Beside our pourover and auto series brewers, we have digital shuttle brewers that control both the temperature and brew volume. These commercial coffee makers maintain water temperature to within ±1° during the entire brew cycle. Pre-infusion, automatic bypass and other programmable process controls allow a “signature” cup to their exact specifications and taste profile.
This line of digitally controlled brewers brew into: 1.5 gallon air gap shuttles, 1.5 gallon vacuum insulated shuttles, and 3.0L airpots. These brewers are simple-to-operate as the brewing control panel offers different brewing capabilities plus a hot water faucet.
Grindmaster 1.5 gallon Vacuum Insulated Shuttle with Stand
This 1.5 vacuum insulated shuttle comes with the stand attached. It has a Brew-Thru® lid and maintains a perfect coffee holding temperature. It is NSF approved. The stainless steel exterior and interior and are adaptable to most large volume commercial coffee makers. The compact design offers easier mobility. This Shuttle with the stand attached has a 1.5 gal capacity with a temperature retention loss of only 4°F after 2 hours and a loss of 8°F after 5 hrs. The outside surface is made of stainless steel and black glossy plastic. The inside liner is entirely stainless steel. The faucet clearance is 7.2” (18 cm) when placed on the stand.
The dimensions of this Grindmaster vacuum insulated shuttle are 22.5” high by 9.5” wide by 16.5”deep. It is 10 pounds and is NSF listed.
Grindmaster 1.0 gallon Vacuum Insulated Shuttle VS-1.0
Do you own a shuttle brewer that is not getting the job done? Does the hot coffee stay hot enough where you need to put it for hours with a great heat loss? This 1 gallon vacuum insulated shuttle with a brew-thru lid may be the answer. This shuttle is made of stainless steel inside and outside and maintains the coffee holding temperature at less than a 4°F loss of heat after two hours. Five hours later the loss is only 8°F. This 1 gallon Grindmaster shuttle has a faucet clearance of 7.2″ when place on a stand. This shuttle also fits most shuttle brewers.
The dimensions of the Grindmaster 1 gallon vacuum insulated shuttle are 4-7/8″ high x 9″ diameter. The actual weight is less than 10 pounds and is NSF approved.
Grindmaster CW-1 and CW-1H for 1.5 gallon SS Shuttle Warmer
These warmers fit under Coffee Shuttles for Grindmaster shuttle brewer models P200, P300 and P400. The rounded corners make them easy to clean. These warmers are for 1.5 gallon (5.7 L) air gap insulated Shuttles. The standard warmers offer 7.5 inches of space below the faucet. The taller model warmer gives 11 inches of space from the faucet to the table top or counter, which is enough room not only for cups, but for decanters and carafe for serving.
The dimensions of the Grindmaster standard shuttle warmer are 7.5 inches high by 9 inches wide and deep; it weighs 5.5 pounds. The taller warmer is the size except it is 11 inches tall and weighs 8 pounds. Both run on 120 volts at 100 watts and 1amp and are UL and CSA listed; CE is also available.
Grindmaster 1.5 Stainless Steel Coffee Shuttle
The Grindmaster 1.5 gallon stainless steel shuttle for shuttle coffee brewers has an eye pleasing appearance with easy to clean rounded features. The easy grip handle makes handling very easy and it lays down on the side when not in use. It has a locking lid and an easy grip handle. An airgap that insulates the coffee so that it will not get burned. The Grindmaster CS-LL Shuttle is designed for the commercial shuttle coffee brewers PB 330 and PB 430 as well as the P and RAPS models made by Grindmaster.
This seemingly small sized Grindmaster CS-LL shuttle holds 1.5 gallons of coffee. The actual physical size of the shuttle is 10” high x 9″ wide x 14.25” deep and the shipping weight is 10.5 pounds. The Grindmaster model shuttle carries a NSF listing.
These are two different styles of shuttels that usually sit on a warmer on in a stand. These shuttles can keep coffee hot for hours by themselves or much longer with a warmer that goes with each individual unit.
Shuttles
What are shuttles? They are sophisticated airpots. Shuttles are connected to there respective coffee brewers and come in various sizes. The shuttles are air-gap insulated or vacuum insulate and hold either 1.5 gallons or come as a 3 liter airpot. The brewers brew into there respective shuttle airpots that are a digitally controlled radiant heat air insulated shuttle or a vacuum insulated shuttle. Shuttles come in various shapes to match there brewers. Some shuttles are round, rigidly square or have a rounded square shape. All of them are made of stainless steel. These shuttle airpots are designed to be placed at designated areas where there are no electric connections or an area where serving decanters can be filled.