Archive for the ‘Shuttle Brewer’ Category
I have had a lot of people looking for commercial coffee brewers. Beside our pourover and auto series brewers, we have digital shuttle brewers that control both the temperature and brew volume. These commercial coffee makers maintain water temperature to within ±1° during the entire brew cycle. Pre-infusion, automatic bypass and other programmable process controls allow a “signature” cup to their exact specifications and taste profile.
This line of digitally controlled brewers brew into: 1.5 gallon air gap shuttles, 1.5 gallon vacuum insulated shuttles, and 3.0L airpots. These brewers are simple-to-operate as the brewing control panel offers different brewing capabilities plus a hot water faucet.
Grindmaster Twin Shuttle Airpot Brewer
This marvelous coffee maker brews into your choice of a coffee shuttle or an airpot. The brewer, which brews a 1.5 gallon shuttle full in 4 minutes, is great for not only regular and decaf coffee, but also for flavored coffees. You can select the amount of coffee and what coffee you want in one brewer and select the amount and coffee you want to make in the other brewer… And have them brewing at the same time. The easy to operate brewing control panel offers different brewing capabilities and includes a hot water faucet. Whichever air gap insulated shuttle you use comes with an easy-to-see sight glass. The airpot and shuttle that comes with this coffee maker will hold the coffee to within 4 degrees for at least 2 hours after the brewing process. Remember: The shuttle comes with a heater to keep the coffee at drinking temperature for longer periods of time. Need more information. Just e-mail us at: info@coffeemakersshop.com with your phone number and question(s) and we will reply within 24 hours by either e-mail or by phone. When you are serving different coffees and different amounts, this is an ideal coffee maker for you. Check it out today.
Features:
- Stainless Brew Baskets and Legs
- 1.5 gallon (5.7L) capacity Shuttle
- 4 minute brew time per shuttle
- Includes (1) 2.2 Liter or 3.0 Liter Airpot [Please specify one]
- 1 CW-1 warmer
It calibrates to all airpots. You can use shuttles for high period demands. Use airpots for flavored and decaf coffees. This twin brewer, RAPS400E, brews into shuttles, airpots or both at the same time.
Specifications:
- Volts/Watts/Amps Brew Heads 2, there
- Capacity (each Shuttle120/240V AC / 6.6 kw / 28 A) 1.5 gal.
- Brew Time: 4 minutes
- Cups per Hour: 600
- Dimensions: 32.5”H x 20.5”W x 18”D
- Shipping Dimensions: 33”H x 27.5”W x 22”D
- Weight: 95 pounds
- Shipping Weight: 100 lbs.
- Listings UL, NSF, CSA, CE (RoHas certified)
Grindmaster Single Digitally Control Precision Brewer
Model PB-330 is a single, digitally controlled brewer. It includes (1) radiant heat, air-insulated, ACS-1 Shuttle® . The ACS-1 Shuttle® is a classic 1.5 gallons (5.7L) stainless steel, air insulated, radiant heat Shuttle®. On the Brewer, these variables are programmable through the front display, water temperature, brew volume, pulse brewing sequence, bypass percentage, low temp/no brew are all programmable. This Brewer will hold the Precise Brew Temperature to +/- 1°F during the complete brew cycle. This brewer has 3 Brew Volumes from ½ gallon (1.9L) to 1 ½ gallons (5.7L). Each volume can be set by “teach” mode to eliminate trial-and-error after set-up.
Accessories include: (CS-1) an additional shuttle, (CW-1) warmer, (1H) Warmer with 11″ faucet clearance, (BB1.5WP) filter paper for the BB1.5SS – 500/case and (DP-2.0) Drip pan for PB-330. Check with us for other options.
Specifications:
- Electrical: Worldwide Voltages Available 120/240V / 6600W / 28 Amps
- 120/208V / 5000W / 24 Amps
- Water Line/Pressure: 3/8” flare/30-80 psi Brew
- 240V: 385; @ 208V: 385
- 5 oz. (148ml) cups per hour
- Dimensions: 28”H x 9”W x 18”D
- Weight: 50 lb.
Shipping Weight 55 lb. Shipping charges are dependent on where they will be shipped from. Call Grindmaster at: 1-800-695-4500 or e-mail at: info@coffeemakersshop.com for actual charges
Certifications for this Grindmaster Brewer: 2 year warranty on parts and 2 years on labor; 4 year warranty on the control board
Grindmaster 1.5 gallon Vacuum Insulated Shuttle with Stand
This 1.5 vacuum insulated shuttle comes with the stand attached. It has a Brew-Thru® lid and maintains a perfect coffee holding temperature. It is NSF approved. The stainless steel exterior and interior and are adaptable to most large volume commercial coffee makers. The compact design offers easier mobility. This Shuttle with the stand attached has a 1.5 gal capacity with a temperature retention loss of only 4°F after 2 hours and a loss of 8°F after 5 hrs. The outside surface is made of stainless steel and black glossy plastic. The inside liner is entirely stainless steel. The faucet clearance is 7.2” (18 cm) when placed on the stand.
The dimensions of this Grindmaster vacuum insulated shuttle are 22.5” high by 9.5” wide by 16.5”deep. It is 10 pounds and is NSF listed.
Grindmaster 1.0 gallon Vacuum Insulated Shuttle VS-1.0
Do you own a shuttle brewer that is not getting the job done? Does the hot coffee stay hot enough where you need to put it for hours with a great heat loss? This 1 gallon vacuum insulated shuttle with a brew-thru lid may be the answer. This shuttle is made of stainless steel inside and outside and maintains the coffee holding temperature at less than a 4°F loss of heat after two hours. Five hours later the loss is only 8°F. This 1 gallon Grindmaster shuttle has a faucet clearance of 7.2″ when place on a stand. This shuttle also fits most shuttle brewers.
The dimensions of the Grindmaster 1 gallon vacuum insulated shuttle are 4-7/8″ high x 9″ diameter. The actual weight is less than 10 pounds and is NSF approved.
Grindmaster Shuttle Airpot Twin Brewer
This marvelous Grindmaster coffee maker brews into your choice of a coffee shuttle or an airpot. The brewer, which brews a 1.5 gallon shuttle full in 4 minutes, is great for not only regular and decaf coffee, but also for flavored coffees. You can select the amount of coffee and what coffee you want in one brewer and select the amount and coffee you want to make in the other brewer… And have them brewing at the same time. The easy to operate brewing control panel offers different brewing capabilities and includes a hot water faucet. Whichever air gap insulated shuttle you use comes with an easy-to-see sight glass. The airpot and shuttle that comes with this coffee maker will hold the coffee to within 4 degrees for at least 2 hours after the brewing process. Remember: The shuttle comes with a heater to keep the coffee at drinking temperature for longer periods of time.
This shuttle airport brewer is made of stainless steel along with the brew basket and legs. This model includes a 1.5 gallon capacity shuttle and a 2.2 liter or 3.0 liter airpot of your choice. It also comes with a warmer for the shuttle. Whether you use the shuttle or one of the airpot the brewer can be calibrated to dispense the exact amount of coffee needed.
This Grindmaster brewer model RAPS400 electrical specifications are 120/240V AC / 6.6 kw / 28 A and the size dimensions are 32-1/2”High x 20-1/2”Wide x 18” Deep. This complete package weighs 95 pounds and comes with the following listings: UL, NSF, CSA and CE.
Need more information. Just e-mail us at: info@coffeemakersshop.com with your phone number and question(s) and we will reply within 24 hours by either e-mail or by phone. When you are serving different coffees and different amounts, this is an ideal coffee maker for you.
What features are on the Grindmaster PrecisionBrew Digital Shuttle Brewer?
The Grindmaster model PBIC-430 is a twin, digitally controlled brewer on a stand that brews into two shuttles. The shuttles are 1.5 gallon vacuum insulated, stainless steel container with a stand. The shuttle is portable and will maintain freshly brewed coffee hot without additional heat for up to four hours or more. The brewer programmable pre-infusion feature allows the operator complete control over the initial soaking of the grounds independently from the pulse control feature. The programmable energy saving feature allows the brewer to go into energy conservation mode after three hours of inactivity. The improved operator feedback in real-time provides the operator with a brew countdown timer; instant knowledge of when the spray-over will finish. The operator feedback now offers a scrolling dripping message indicating that the brew basket is draining and then a scrolling done message indicating that the brew cycle is completely done. The controllable drip time allows the operator to control the length of time the brew basket will remain lock after the spray-over is completed. This brewer will also brew into a 3.0 liter airpot. This model also comes as a single digitally controlled brewer on a stand.
The following brew variables are programmable through the front display. They are the water temperature, the brew volume, the pulse brewing sequence, the bypass percentage and the low temperature/no brew. This brewer will hold the precise brew temperature to +/- 1°F during the complete brew cycle. It will brew three distinct brew volumes from ½ gallon to 1 ½ gallons. Each volume can be set by ‘teach’ mode to eliminate trial and error set-up. The brewer programming lockout setting can be “locked” to prevent tampering.
Filter paper size requirement for this Grindmaster PrecisionBrew brewer is 14inches by 6 inches and are sold in a case of 500. Drip pans for this brewer are also available as an accessory. Other options include a gourmet spray head and a 15 KW 3 heater.
The overall height of this brewer is 36.1 inches by 22.5 inches wide by 22.3 inches including spigots and volume tubes. The stand legs are 4″ high to allow for electrical and water hook-up. The plumbing requires a 3/8″ flare water line that will handle 30 to 70 psi. The electrical line cord is not included, but the brewer must have a 30 amp connection. The shipping weight for this brewer is 145 pounds.
Grindmaster Twin Digitally Controlled Precision Brew
This Twin, digitally controlled brewer includes 2 vacuum insulated stainless steel 1.5 gallon shuttles® with stands. These shuttles are 1 so insulated that they will keep the shuttle of freshly brewed coffee hot without additional heat.
The following brew variables are programmable through the front display: Precise Water temperature during the brew cycle to +/- 1° F° during the complete brew cycle, Three (3) Brew Volumes, Pulse brewing/pre-infusion sequence extracts up to 20% more dissolved solids per batch of coffee. The bypass adjustment for large and medium brew volumes can program up to 33% of the total volume to bypass the coffee grounds. This does not affect the brew volume. The Low temp/No brew setting allows the brew cycle to only begin when the water has reached the optimum brew temperature. This coffee maker and shuttles comes with a 2 year warranty on parts and labor and a 4 year warranty on the control board. Contact us for further details about this great brewer. We will answer any question you may have.
The electrical specifications for this Precision Brew model PBIC-430 brewer are 120-/240V / 6600W / 28A and 120/208V / 5000W / 24A. Three phase models are available as well. This double will produce 385 5 oz. cups of coffee per hour at a minimum temperature of 140°F. The overall dimensions of this double brewer are 36″H by 22.5″ W by 17.75″D and weighs 135 pounds.
This Grindmaster Twin Digitally Controlled Precision Brew brewer comes with a 2 year parts and 2 year labor warranty and 4year warranty on the control board. It carries these listings: UL, CUL, NSF.
Grindmaster Single Digitally Control Precision Brewer
The model PB-330 is a single, digitally controlled coffee maker brewer. It includes (1) radiant heat, air-insulated ACS-1 Shuttle®. The ACS-1 Shuttle® is the classic 1.5 gallons stainless steel, air insulated, radiant heat Shuttle®. Brew variables are programmable through the front display. They include water temperature, brew volume, pulse brewing sequence, bypass percentage, low temp/no brew are all programmable. This Brewer will hold the Precise Brew Temperature to +/- 1°F during the complete brew cycle. This brewer has 3 Brew Volumes from ½ gallon (1.9L) to 1 ½ gallons. Each volume can be set by “teach” mode to eliminate trial-and-error set-up.
Accessories include: (CS-1) an additional shuttle, (CW-1) warmer, (1H) Warmer with 11″ faucet clearance, (BB1.5WP) filter paper for the BB1.5SS comes in 500/case and (DP-2.0) Drip pan for PB-330. Check with us for other options.
Standard voltages for this urn are 120/240V / 6600W / 28 amps and 120/208V / 5000W / 24 amps. A water line with 3/8” flare and pressure of 30-80 psi is required. The number of five ounce cups per hour produced by 120/208 volt system is 460 and 385 for 120/208 volt system. The dimensions of these Grindmaster commercial coffee urns are 28”high by 9”wide by 18”deep. This urn weighs 50 pounds and comes with a 2 year warranty on parts and 2 years on labor; 4year warranty on the control board.
Grindmaster Shuttle Airpot Brewer P300E
This Single Shuttle brewer has a brew light, stainless brew basket and a radiant heat, air-insulated 1-1/2 gallon model CS-LL shuttle that makes transporting easy and keeps coffee fresh and hot four up to four hours. The legs are stainless steel. A hot water faucet is on the left of front face of the brewer. The P300 is a compact size of 9 inches wide and takes up very little counter space. There are many options available with the brewer including a warmer that is 7.5 inches tall or a warmer that is 11.5 inches tall. When serving a large number of people a 3 liter, 101 ounce, airpot for serving is available.
This shuttle airpot brewer from Grindmaster comes with one shuttle and uses: 120/240 volts, 6600W/24A with CS-LL Shuttle included. The voltage without the shuttle is: 120/208 volts, 5000W/24A. The dimensions of this brewer are: 28″high x 9″wide x 23.5″ deep and has a shipping weight of 55 pounds. This Grindmaster P300E shuttle airpot brewer carries the following listings: UL, NSF, CSA and comes with a one year parts and one year labor warranty.